Acrylic doll's clothes hangers
Zhong
- August 2, 2024
*All images are original creations by the author. Please do not use them for any purpose without authorization!
I was inspired by the Link Click clothing hangers.
I’m going to give it to my Hinata as well. 🥰
There are only five drawings needed, and even the standee only requires one.
The standee needs a base hole on the top (to connect to the crossbar) and an insert on the bottom (to connect to the base).
Two inserts on the left and right side of the crossbar corresponding to the holes in the base of the bracket.
Because the crossbar needs to hang hangers made skeleton dieline, but as I known, Wooacry use aotumatic sorting system and they will put a QR code on the backside, the sorting QR code is 1cm * 1cm, so I made a half-circle on top, if there is no such half-circle, their mockup system will not be able to save.
The left and right sides of the base to put two and the bracket insert corresponding to the base of the hole, the distance is the length of the crossbar.
The hanger does not need to have components, as long as the opening is larger than the width of the crossbar of the hanger.
There is no difficulty in assembling, the overall size I made is 19cm (length), 10cm (width), 17cm (height), here you can refer to it!
Ohhh my gosh!! Really cute!!
-
DIY Design Acrylic
$0.99+
